Hi,

I was wondering for general advice on how to make the Obi Rope more rigid and less springy? I was able to add more distance constraints (300 or so) and that helped a lot, but I found I also had to take the mass down of each particle (painted to select). I got the rope to be rigid and almost no spring, but my problem is I have a pin constraint on the top particle and a pin constraint on the bottom. The bottom one is attached to a sphere collider and I have to make the sphere rigidbody's weight really light or else the springiness comes into effect in full force again with a heavier weight on it.

Do you think I just have to increase the resolution? I found that resolution (amount of particles) is tough because I'm using a very tiny rope/string.

Any suggestions would be much appreciated, thank you.

Hi.
I have existing rope with couple on handlers on both of rope ends (attached to first and last rope particle).
I want to substitute them (or possibly only one of them with pin constraint).
I think handle can be removed/added with the help of disabling/enabling handle gameObject.
For adding ping constraint I'm launching some variations of following coroutine:

Hi,

I am trying to use 2D mode in a vertical plane, when I rotate the emitter and particle system, it fails in simulation. The flow is not accurate and distributes all around in a very high speed. However there's no problem with emitter in horizontal plane. The only solution I achieved was to change the mode to 3D and update solver, however I really want to use 2D mode. So, I am waiting for your precious advises, thanks a lot.

Hi,
Is there a way to read out the current "stretchedness" of an ObiCloth actor?

Thank you!
Jan

Hi there,
 
   I'm new to Obi in general, and just starting out with Obi Cloth. I have a scene where there are multiple differently sized items that I want to cover with pieces of cloth, to be uncovered later during runtime.

Now, in order to cover the different items, I'm using a simple plane that I add an Obi Cloth Component as outlined in the instructions. While this works in a general way, it seems to me that no matter what size of cloth i define (using the scale properties of the object's Transform), the resulting cloth expands/shrinks to the 1:1 scale as soon as I hit start, in effect negating any scale settings of the master Transform.

How do correctly size an Obi cloth so it stays at the size/scale I set? Do i have to create an appropriately sized mesh for each cloth, or can I use one mesh for all (as I'm doing now)?

Since this is a fairly basic issue, I assume I've missed an essential part of the manual - so any pointers appreciated.

Thanks,
ch  

Ok, so in order to fix a particle and make it move with the transform i should set the inverse Mass of the particle to zero (making the mass infinite I think). This works nicely. But how do I achieve the opposite, how can I unfix the particle again?  
If I give it back it's cached inverse mass it doesn't do anything - it doesn't react to gravity etc...

I'm interested in using ObiWire to simulate stiff wires (like copper wires) that the user can bend at will but maintains its basic shape when subject to gravity.
Does anyone have any tips on how to set up the solver/constraints to get this sort of behavior? Thanks in advance!

Dear Obi-Team
Today I bought your Rope Asset. But each sample scene crashes at start, because of IndexOutOfRangeExceptions.
(I work on Mac 10.12.6 (16G29) with Unity 2017.2.0f3 Personal (64bit) if that helps. )

E.g. in the scene "RopesAndJoints":
IndexOutOfRangeException: Array index is out of range.
Obi.ObiSolver.UpdateActiveParticles () (at Assets/Obi/Scripts/Solver/ObiSolver.cs:408)
Obi.ObiSolver.AddActor (Obi.ObiActor actor, Int32 numParticles) (at Assets/Obi/Scripts/Solver/ObiSolver.cs:324)
Obi.ObiActor.AddToSolver (System.Object info) (at Assets/Obi/Scripts/Actors/ObiActor.cs:221)
Obi.ObiRope.AddToSolver (System.Object info) (at Assets/Obi/Scripts/Actors/ObiRope.cs:380)
Obi.ObiActor.Start () (at Assets/Obi/Scripts/Actors/ObiActor.cs:134)

What am I doing wrong?

Best
Livio

um, sorry for my short English.. i purchased it Yesterday, but i really want to get this information hurry.
For example,
I want Measure fluid Particle volum in bowl.
Or want measure fluid Particle weight in bowl.

Is there any Api Support? or Devleop Idea?

Hi,

I'm using Obi Cloth and Obi Fluid in the same build. That has been working great and I love your assets! The problem is after 2 - 5 minutes of my game running, it will just crash. I tried to figure out the problem but had no luck. The fluid and cloth all work fine, and it doesn't seem like anything in particular causes the crash, it seems to just be time based. This crash happens in Unity and in stand alone builds. When it happens in Unity it does not give me an exception, it just crashes Unity completely and I have to restart the program.

After crash if I click the "Debug" Option it says this... "Unhandled exception at 0x00007FFBCA9AFB76 (libOni.dll) in skirtime.exe: 0xC0000005: Access violation reading location 0x000000006AE658C0."

Also, the output log says this before the Crash...


========== OUTPUTING STACK TRACE ==================

0x00007FFBBB67106F (libOni) SetDiffuseParticleNeighbourCounts
0x00007FFBBB66FFD8 (libOni) SetDiffuseParticleNeighbourCounts
0x00007FFBBB66F645 (libOni) SetDiffuseParticleNeighbourCounts
0x00007FFBBB66CD56 (libOni) SetDiffuseParticleNeighbourCounts
0x00007FFBBB6B98C6 (libOni) Generate
0x00007FFBBB6BADE1 (libOni) Generate
0x00007FFBBB6B94A9 (libOni) Generate
0x00007FFBBB6E0559 (libOni) Generate
0x00007FFC05631FE4 (KERNEL32) BaseThreadInitThunk
0x00007FFC073EEF91 (ntdll) RtlUserThreadStart

========== END OF STACKTRACE ===========

**** Crash! ****


I hope this help, Let me know if there is anything else that might help you.

Thanks for your help,
Nick.